epo GEM- Fluorescent Colors

Colors glow in the dark under black light

By day a beautiful, stunning piece of jewelry; by night a beautiful, stunning, fantastically glowing and sparkling one of a kind masterpiece. Get the double effect with IAM epoGEM Fluorescent adhesive that glows in the dark under black light. Exquisite jewelry items made with epoGEM Fluorescent adhesive catch everybody's special in places where black light is the source of illumination like in discos, museums, amusement parks, and night clubs. Use the brightly glowing in the dark adhesive for Halloween jewelry, Christmas decoration, or other event decoration where the glow in the dark effect is not only a ‘nice touch’ but a prerequisite.

 

Fluorescent Blue Fluorescent Red Fluorescent Green Fluorescent Yellow

 

 

Due to your monitor and printer settings color samples shown may vary to original adhesive colors.

 

 

 

 

 

 

 

 

 

 

To sit in the shade, you have to save paper first - Go Green!

 

epoGEM - Metallic Effects

 

IAM epoGEM Metallic color adhesives display strong, solid metallic effects with a glossy surface brilliance. Combine stylish and classy metal jewelry pieces or decor items with valuable gem stones, fashion crystal beads, or even interesting metal setting items to achieve the much desired metallic look. epoGEM ’s Metallic Effects bonding material is the perfect metal partner to support and boost your silver, gold and copper themed creations.

 

Silver Effect

 Gold Effect

Copper Effect

 

 

Due to your monitor and printer settings color samples shown may vary to original adhesive colors.

 

 

 

 

 

 

 

 

 

 

Easier saving paper than planting trees! - Go Green!

 

 epoGEM - JEWELRY ADHESIVE

 

IAM epoGEM is without a doubt IAM's flag ship in adhesives. IAM epoGEM is primarily used in the fashion jewelry and accessory industry to permanently embed precious jewelry stones into rings, brooches, necklaces, body piercing jewelry and fashionable personal effect items.


IAM epoGEM jewelry adhesive not only assures the all-important everlasting bond of crystal to jewelry item, but impresses jewelry admirers with its unique surface shine, from velvety semi-gloss to hi-gloss, while color-matching today's well-known and frequently used crystal shades.

IAM's unrivaled feature in all colors is the fine gloss and its velvety surface. No other adhesive claimed this feature for itself. The fashion jewelry industries use this unique characteristic by the use of epoGEM as a visual Design element. No other jewelry glue supplemented crystals and other precious stones better than epoGEM.

IAM has a large pallet of different epoGEM adhesives varying in color, shades and effects.
The matching Crystal and Pearl colors are available. The adhesives retain their original color, shade or effects over several years. And IAM epoGEM adhesive colors could be mixed to obtain unique color structures or imitations like marble, fur, and water waves to mention but a few. The genius lies with the artist, during mixing and molding of the adhesive.

 

 

epoGEM - STANDARD COLORS

IAM epoGEM Standard Colors are unique in their fine velvety surface shine. A delicate semi-gloss supports the bright sparkle of Swarovski crystals and other precious gems.

Click here to see color chart. 

 

 epoGEM - PEARL EFFECT

IAM epoGEM Pearl Effect adhesive is unparalleled in its composition. Not only does it securely bond precious and expensive stones to its intended host object, like all IAM jewelry adhesives guarantee, but it also radiates a most incredible hi-gloss surface shine once the adhesive is set. Give your jewelry pieces the overall brilliance they deserve use this advanced adhesive for your setting!

Click here to see color chart.

 

 

epoGEM - METALLIC EFFECT

IAM epoGEM Metallic Effect adhesive is especially designed for those metallic-look themed jewelry items or crystallized decors. Use any of our epoGEM Metallic Effects as your trusted crystal stone bonding agent and, at the same time, let it shine as a visible element of your crystal design. With its natural surface gloss it will ignite even more the brilliance of your jewelry masterpieces.

Click here to see the color chart. 

 

 

 epoGEM - FLUORESCENT COLORS

    Colors glow in the dark under black light.

IAM epoGEM Fluorescent Colors let your jewelry items shine under the sun and glow at night under black light. Never miss an opportunity, to impress your customers with this extra special touch. Should jewelry or jewelry decorated objects for a special event shine and sparkle in the dark?

Click here for available colors.

 

In the event where a custom shade is needed, we at IAM would be happy to process special orders.

Please contact us here

 

epoGEM is a self-hardening adhesive. No heating or other final hardening treatment is necessary. As previously mentioned, in its hardened state epoGEM has, what's in the jewelry industry is greatly appreciated. A velvety subtle shining surface that is complements sparkling crystal stones and beads. Furthermore, epoGEM is scratch resistant, extremely hard, unbreakable and indestructible. These important features allow designers to incorporate 3D shapes like hearts, balls or tiny figurines into their jewelry creations.

The preparing and handling of the 2-component adhesive epoGEM is easy and clean.
It is odorless, releases no fumes, and is non-aggressive to most people's skin.
epoGEM will remain useable for at least 1 hour (depending on room temperature and color used) before the hardening process sets in. It also connects seamlessly to already hardened epoGEM adhesive, which allows the adhesive to be used on bigger crystal set projects like statues, ornaments, picture frames, and gift articles.
With epoGEM adhesive are no limits in the design of jewelry items or other crystallized objects. epoGEM enriches and complements all kinds of crystal stones and beads and the new interesting creations amaze jewelry lovers all over the world.

 

 

 

 

  Think...There is no Planet B - Go Green!

THE ADVANTAGES OFFERED BY IAM ADHESIVES

 

Whether your company is active in the light or heavy manufacturing industry is irrelevant. It is very important that the used adhesives in your production correspond to your requirements and the needs of your customers. IAM adhesives were strictest laboratory tests subjected to make sure that our products are of the highest quality and not disappoint.

 

1.) UV–Protection


No more color loss or change of your crystal adhesive. All IAM epoGEM adhesive products include UV protection.
UV rays affect the color pigments of the adhesive you are using to affix precious stones to jewelry items or other articles.

With IAM epoGEM - Effect & Standard the colors are UV protected and remain fresh, vivid, and in their original color shade and tone over several years.
By using IAM epoGEM adhesive your customers will value your concern to use only high quality products in your crystal production.

Applies to epoGEM - Effect and Standard


2.) Self-Leveling Surface


No more smoothening out surfaces! No more wipe off fingerprints!
To even out adhesive surfaces with oil or water and to clean off fingerprints to give your jewelry a professional smooth look is a work procedure in the past. After you finished applying IAM epoGEM just let it rest for a few minutes and the surface will self-level.
Big savings in production means time and money.

Applies to epoGEM - Effect and Standard


3.) One component B matches all epoGEM - Standard component A adhesives


No more color matching components needed; one type component B, hardener, is used with all IAM component  A adhesives to achieve best results. Yes, another unique product fact only IAM offers.
One type hardener can be used with any other of IAM's component A adhesive products. No more wasting of unused component B substance.  E.g.: If you have a rest amount of hardener delivered together with epoGEM Crystal you may use it with the left-over epoGEM Aquamarine component A sustainable cost reduction through efficient use of materials.

Applies to epoGEM -Standard

 

4.) High Gloss Surface


No more polishing the adhesive surface to make it shine to match sparkling crystals. A surface high gloss magically appears after a few minutes of resting. IAM epoGEM produces the glossiest surface by far – and all by itself. No other product on the market to date matches the quality and strength of our adhesive surface gloss capacity. Just let the final product start its hardening process and the gloss emerges after only a few minutes.
A visual extravagance you bestow onto your high quality products that proves to your customers that you care. 

Applies to epoGEM - Effect , epoGEM - Standard


5.) Permanent Bond of Crystals to Host


No more crystals falling out of your jewelry items or other crystal set projects. Everlasting bond guaranteed. In the crystal setting business the falling out of crystals is a major problem. However, with the new innovative technology we use in IAM epoGEM adhesive this dilemma has ceased to be an issue. Whether an epoGEM crystal set item is dropped to the floor or accidentally knocked, the bond is permanent.


The difference lies in the glue!

Note:
Prerequisite for permanent bond: stones are set correctly and according to the manufacturer’s instructions.
Items mishandled, intentionally or accidentally, may break.


Products set with IAM epoGEM provide your customers with a strong and secure selling platform.

Applies to epoGEM - Effect and epoGEM - Standard


6.) IAM's Top Priority - Customer Service

IAM makes customer service its top priority. Our goal is 100% customer satisfaction and customer success.
We will be there when you need us; we will be there to deliver quality products; and we will be there to ensure your complete happiness and success.
If you need a personal epoGEM color or a consistency matching for your needs or you want a special color protected to improve your own trademark call us and we can discuss your request further in detail. Contact us today with a quick email or call and let us know how we can assist you.

 IAM – The next Generation!

 
 
 
 
 
 
 
 
 

   Think...There is no Planet B - Go Green!

 

epoSCULPT - MODELING COMPOUND


IAM epoSCULPT is a 2-component putty-like modeling mass, easy to mix, for kneading and for molding and design. The compound self-hardens 24 hours after the mixing of the two components and turns to an extremely strong product and is indestructible. IAM epoSCULPT adheres on hard-surfaces, textures like wood, plastic, all kinds of metals, styrofoam, stone, bricks, glass, etc. as effectively that they can be formed at fixed 3D-sculptures. No support from other products or materials necessary.

IAM's epoSCULPT's final structure allows all kinds of finishing touches without to harming them. This includes drilling, lathing, sanding, painting, styling, carving, and other working methods. Its use is manifold; sculpting, prototyping, restoring, decorating, modeling, carving, making pottery or antiques, underwater sculpting and more.
It is perfect to be used as a teaching material, as a learning and training tool in schools and universities.

 

 

IAM epoSCULPT is available in 9 base colors:

White   Grey   Blue  Green  Yellow  Pink  Red   Brown   Black

See color chart here 

Colors can be mixed to achieve a marble effect or a different base color.

  

 

    IAM epoSCULPT features:
  • Quick and easy mixing
  • Ease of use
  • Lightweight material
  • Waterproof
  • Freeze-heat stable
  • Self-hardening (no heating)
  • Toxic-free!, no fumes, non-hazardous
  • Indestructible, no shrinking, no cracking
  • Semi surface shine
  • Surface can be textured
  • Reliable and durable finish
  • Colors can be mixed
  • Easy clean up with soap and water
  • And many, many more...

 

 

 

 

 

 Air is nothing but life, if polluted how can we survive ? - Go Green!

More Articles ...

An excerpt of some international enterprises who use epoGEM:

 

www.stephengormley.com

Follow Us

Sign in with Google+ Call me on Skype Subscribe on YouTube
Sign in with Google+ Call me on Skype Subscribe on YouTube